Skip to main content

Network Overview

Understanding the EDC's pre-wired network architecture and connectivity options.

⏱️ Read Time: 3 minutes

Overview​

The EDC includes a network infrastructure with all internal components connected via a managed switch. The network is designed for immediate deployment with minimal configuration required.

Core Network Components:

  • EnGenius Networks ECS2510FP managed PoE+ switch (8-port, 2.5Gb)
  • EnGenius Networks ECP106 or ECP106-INT managed PDU (network-monitored power)
  • IoT monitoring device (PoE-powered)
  • Compute nodes (edition-dependent)
  • Pre-wired keystone jack panel for external connections

Network Architecture​

Internal Network​

All components connect through the EnGenius switch, which provides:

  • Data connectivity for compute nodes, PDU, and IoT devices
  • Power over Ethernet (PoE+) for the IoT monitoring device and your Wireless Gateway/AP.
  • Management access for monitoring and control
  • Uplink ports for external network connections

Factory Configuration​

The switch and PDU ship with factory default settings, and functions essentially as an unmanaged switch. Initial network access uses the default IP addresses and credentials provided by EnGenius.

Default configuration details:

Port Assignments by Edition​

The EDC comes pre-wired with all internal connections completed. Port assignments vary by edition.

For detailed wiring diagrams and complete port mappings, refer to:

👉 Wiring Diagrams - Appendix

This appendix includes:

  • Complete port-to-device mapping for each edition
  • Power distribution diagrams
  • Cable labeling reference
  • Available ports for expansion

Quick Reference​

📦 NUC Edition:

  • Ports 1-6: Compute nodes (2 RJ45 ports per NUC, labeled cables)
  • Port 7: IoT device (PoE powered)
  • Ports 8-9 (SFP+): Available for uplink, gateway, or other devices
  • Port 10 (SFP+): PDU network connection

🔶 HR01-2 Edition:

  • Ports 1-4: Compute nodes (2× 2.5G RJ45 per HR-01 node)
  • Port 5: IoT device (PoE powered)
  • Port 6: PDU network connection
  • Ports 7-10: Available for uplink, gateway, or other devices
  • Note: Direct DAC interconnect between HR-01 nodes (not through switch)

Copper Connection:

  • Connect site network to switch port 9 or 10 (SFP+ with copper transceiver)
  • Supports auto-negotiation: 100M/1G/2.5G/5G/10G
  • Standard RJ45 Ethernet cable

Note: SFP+ ports 9-10 come with copper transceivers pre-installed for RJ45 connectivity

Cellular Gateway:

Satellite (Starlink):

  • Compatible with Starlink terminals
  • Connects to available switch port
  • Provides connectivity in remote locations

Network Access Points​

Keystone Jack Panel​

The EDC includes a keystone jack panel for connection of the EDC items to the switch due to the internal wiring for neat cable organization.

Management Access​

Direct Connection Method (Local Management):

  • Connect laptop to available keystone jack
  • Access switch, PDU, and compute nodes via their management interfaces
  • Default IP addresses and credentials in EnGenius documentation unless changed

Cloud Management (Optional):

  • Add switch and PDU to EnGenius Cloud for remote management
  • Centralized dashboard for monitoring and control from anywhere
  • Automatic firmware updates and simplified configuration
  • Free for basic features; advanced features may require subscription
  • See EnGenius Cloud documentation for device onboarding

Advanced Configuration​

For network customization beyond basic uplink connectivity:

Note: The EDC is pre-wired for immediate operation. Advanced network configuration is optional and should only be performed by qualified network administrators.

What's Next?​

For initial network setup and connectivity:

👉 Switch Configuration - Configure EnGenius switch and verify connectivity

For connecting devices to the EDC:

👉 Connecting Devices - Laptop access and external devices